MT. No1, No2, No3, No4, No5
- The advantage of using a CARBIDE TIP type are that no wear even a work frequent mounting and dismounting and that a machine with rapid start main spindle.
CARBIDE TIP SIZE TABLE Each Size Same as LS Model (units mm)
| Model | (MT) | @ | l | angle |
| LSA No.1 | 1 | 6 | 12 | 60 |
| LSA No.2 | 2 | 8 | 16 | 60 |
| LSA No.3 | 3 | 10 | 20 | 60 |
| LSA No.4 | 4 | 14 | 25 | 60 |
| LSA No.5 | 5 | 18 | 35 | 60 |
